Basic safety instructions
6
,
,
Series of steps
1.
2.
3.
1.2.5
Symbols in graphics
A, B, C ... View
1, 2, 3 ... Item numbers
Hazardous area
-
Safe area (non-hazardous area)
.
1.3
Documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the
nameplate
• Endress+Hauser Operations app: Enter serial number from nameplate or scan
matrix code on nameplate.
1.3.1
Standard documentation
Document type: Operating Instructions (BA)
Installation and initial commissioning ‒ contains all the functions in the operating menu
that are needed for a normal measuring task. Functions beyond this scope are not
included.
Document type: Brief Operating Instructions (KA)
Quick guide to the first measured value ‒ includes all essential information from incoming
acceptance to electrical connection.
Document type: Safety Instructions, certificates
Depending on the approval, Safety Instructions are also supplied with the device, e.g. XA.
This documentation is an integral part of the Operating Instructions.
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
1.3.2
Supplementary device-dependent documentation
Operating Instructions
BA00335F: Density Computer FML621
Special Documentation
• SD01622P: Weld-in adapter (installation instructions)
• TI00426F: Weld-in adapters, process adapters and flanges (overview)
2
Basic safety instructions
2.1
Requirements for the personnel
The personnel must fulfill the following requirements to carry out the necessary tasks,
e. g., commissioning and maintenance:
‣
Trained, qualified specialists must have a relevant qualification for the specific function
and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
Liquiphant FTL51B Density
Endress+Hauser