Accusense ® Q-Series Charger; Charger Mode/Battery Type Selection - Yale 524150797 Maintenance Manual

®
AccuSense Q-Series Charger
CHARGER MODE/BATTERY TYPE
SELECTION
WARNING
DO NOT use batteries types that are not approved
for the charger or improper mode settings. Dam-
age to the batteries or charger may occur if the
mode setting is not correct for the type of batter-
ies being used. If the battery manufacturer of the
battery you are using is not listed, contact Service
Engineering through the Contact Management
System.
Figure 3. Q-Series Charger
NOTE: Mode settings can be checked by connecting
the battery charger to AC power source, while con-
nected to the battery, and watching the LED display.
See charger manual for details in diagnosing charger
LED flashes if the LEDs do not flash when initially
connected to power.
NOTE: If the battery manufacturer of the battery you
are using is not listed, contact Service Engineering
through the Contact Management System.
2
®
AccuSense Q-Series Charger
The battery charger has 7 mode settings. The proper
mode setting is determined by the type batteries be-
ing used in the battery pack. Note that batteries must
be uniform in brand and model. Do not mix differing
battery sizes, construction types, or old batteries with
new batteries. See Figure 5.
1. CHARGER, Q-SERIES
2. DC OUTLET
3. GREEN LED, CHARGED
4. YELLOW LED, CHARGING
5. RED LED, DETECTION
6. MENU SELECT BUTTON
7. RED LED, SHUTDOWN
8. RED LED, POWER
9. PC PORT AND DIP SWITCHES
10. BATTERY LEADS
11. MFR MOD NUMBER LABEL
Figure 4. Component Location
2200 YRM 2030