Drive Unit Compartment Covers - Yale 524150797 Maintenance Manual

Introduction
A. LH SIDE
B. RH SIDE

DRIVE UNIT COMPARTMENT COVERS

The drive unit compartment is concealed behind a
molded cover which fits securely around the drive unit
and steer support to the frame.
To remove the drive unit cover, start at the top left
edge of the cover and with both hands pull the cover
away from the frame until the cover kicks out from the
retaining clips. Repeat this for the right side of the
cover. Work around the edge of the cover umtil free
from the truck. See Figure 2.
2
C. FORKS TRAILING
D. FORKS LEADING
Figure 1. Truck Orientation
To install drive unit cover, place the bottom of the drive
unit cover onto the frame and position the lower edges
partially into the lower retaining clips. Align holes in the
in the cover with alignmnet pins attached to farme.
Push the top of the cover partially into the upper
retaining clips. Do not push either edge of the cover in
completely in before starting all edges into the proper
place. When the cover is aligned and started properly,
press the cover completely into the retaining clips. See
Figure 2.
8000 YRM 1666