Diagnostic Trouble Codes
POSSIBLE CAUSE
A. LOW BATTERY CONDITION
B. CONTROLLER WIRING FAULT
C. FAULTY CONTROLLER
COMPONENT OPERATIONAL CHECK
NOTE: Always check battery condition and state of charge before performing electrical troubleshooting. A faulty
or low charged battery will cause electrical features to not operate as designed and give incorrect readings while
performing electrical tests.
PROCEDURE OR ACTION:
1. Conduct a visual inspection of all connectors/wiring associated with the fault code.
Are any faults detected/observed?
YES: Repair/replace connector or wiring associated with faults found. Refer to the appropriate Electrical
System YRM.
NO: Proceed to Step 2.
2. Re-key the vehicle.
Is the code still present?
YES: Disconnect battery and discharge the capacitor. Connect battery and re-key the vehicle prior to perform-
ing Cause A.
NO: Problem may be intermittent.
Check the Service Manual section in Yale Axcess Online for possible updates and check pertinent Bulletins
9030-20-38
Please refer to the end of this procedure for supporting diagrams.
DTC 30086
LowBatt
NOTE
ELECTRICAL SYSTEM