Changing Mode Setting - Yale 524150797 Maintenance Manual

ACCUSENSE Battery Charger

Changing Mode Setting

NOTE: Mode settings can be checked by connecting
the battery charger to a 120V AC power source and
watching the LED display. The LED display on the
charger will flash to indicate the selected battery
mode. Consult Table 3 to determine the selected
22
Figure 20. Switch Position Mode Chart
mode. If the LEDs do not flash when initially connected
to power, refer to Troubleshooting in this section.
Modes are set by the sequence of the dip switches.
Tampering with the Charging Mode Label voids
warranty. See Figure 20 for dip switch settings.
2200 YRM 1508