Opening The Setting Menu; Changing The Basic Settings - Henny Penny FlexFuison GOLD FGE-615 Installation Manual

6.4.1
Requirement
6.4.2

Opening the Setting menu

➢ The unit is on
a) Turn the Select knob to the
⇨ The indicator light illuminates.
⇨ The left display shows "PASS".
⇨ The right display flashes "0000".
b) Use the right knob to select the password.
⇨ The right display shows the selected password.
c) Press the "START STOP" button.
⇨ The left display flashes "HAC".
d) Use the left knob to select OPt.
⇨ The left display flashes "OPt".
⇨ The basic settings can be changed.

Changing the basic settings

a) Press the "START STOP" button.
⇨ The left display flashes the first number of the basic setting; refer to
the list of basic settings.
⇨ The centre display shows "OPt".
⇨ The right display shows the first set value.
b) Turn the left knob.
⇨ Select a number.
c) Press the "START STOP" button.
⇨ The basic setting can be adapted.
d) Turn the right knob.
⇨ Select a new value.
e) Press the "START STOP" button.
⇨ Accept changes or in order to change the basic settings.
f) Press and hold the "STEP" button for 3 seconds.
⇨ The changes are saved.
⇨ The left display flashes "OPt".
⇨ The centre display shows "Stor".
g) Press the "STEP" button to leave the Settings menu.
Connecting the unit
Settings symbol.
6
Basic settings
31