Table of Contents
Advertisement
Connecting the unit
6
Making the water connection
6.5.3
Requirement
34
➢ Pressure-resistant hoses suitable for drinking water available
a) Connect the hoses to the water taps.
b) Open the water taps and flush the hoses.
c) Insert dirt filters into the two water connection fittings.
d) Connect hoses to the unit.
e) Open the water taps and check the threaded fittings for leaks.
Connecting soft water twice
If only a soft water connection is available at the installation site, the hard
water connection fitting and the soft water connection fitting must be
connected by means of a T-piece.
Soft water connection twice
a Soft water tap
b Backflow preventer
c Hose
d Soft water connection fitting
➢ Hose connected to soft water tap
a) Insert a dirt filter into the hard and soft water connection fittings.
b) Connect the T-piece with seals to the connection fittings.
c) Connect hose with seal to the T-piece.
d) Open the soft water tap and check the threaded fittings for leaks.
e Hard water connection fitting
f Dirt filter
g T-piece
h Seal
Advertisement
Table of Contents
