Table of Contents
Advertisement
Connecting the unit
6
Making the exhaust air connection
6.7.1
Requirement
38
e) Fill water into the discharge funnel.
6.7
Making the exhaust air connection
Information regarding the exhaust air
connection
When setting up the unit under an exhaust hood, observe the applicable
regional regulations for ventilation systems.
CAUTION
Risk of physical damage from fouling of the exhaust air ducts
a) Do not incorporate the exhaust air line directly into an exhaust air
system.
CAUTION
Risk of corrosion damage from condensate
a) Install the exhaust air line such that condensate cannot collect.
Flexible aluminium hose
▪ Nominal diameter 63 mm (2in) for sizes 6 and 10
▪ Nominal diameter 76 mm (3in) for size 20
▪ Maximum length of hose 2.5 m (98in)
▪ Temperature-resistant to 180 °C (356°F)
a) Connect hose to exhaust air connection fitting.
b) Route hose to the exhaust hood with about a 3° rise.
c) Secure end of hose about 50-200 mm (2-8in) below the exhaust hood.
Advertisement
Table of Contents
