Table of Contents
Advertisement
Ensuring conformity with
standards
Improper installation
Fire prevention
Organisational measures
Transportation and storage
2
Safety information
The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation cannot
be ruled out and are mentioned specifically in the safety instructions and
warnings.
The installer must be familiar with regional regulations and observe them.
Observe applicable international, European and national laws, regulations,
standards and directives for the unit when transporting, setting up and
connecting it.
Risk of property damage and personal injury from improper
installation
▪ Install the unit only as specified in these installation instructions.
▪ Use only original spare parts.
Risk of fire from combustible surfaces
▪ Observe general fire prevention regulations.
Risk of property damage and personal injury from lack of
organizational measures
▪ Identify hazard areas when transporting, setting up and connecting the
unit.
▪ Prior to starting the installation work, notify any operators present about
the procedure.
▪ Prior to starting the installation work, discuss how to behave in an
emergency.
▪ Use equipment and protective gear suitable for the activity.
▪ Brace housing components to prevent them from falling over and
dropping.
Risk of personal injury and property damage from improper
transportation and improper storage.
▪ Store the unit in a dry, frost-free environment.
▪ Observe the safety regulations for the lifting gear used.
Safety information
2
7
Advertisement
Table of Contents
