Table of Contents
Advertisement
Connecting the unit
6
Making the wastewater connection
6.6.3
Requirement
36
Cleaning system
Manual cleaning system
Pictogram on control panel
Connecting the wastewater line permanently
Connecting the wastewater line permanently
a Wastewater discharge from
unit
b Wastewater line
c Wastewater system
NOTICE
If a waste trap is installed in the wastewater system, a vacuum breaker
must be installed in the wastewater line.
Polypropylene (PP) pipes and elbows
▪ Heat-resistant to 95 °C (203°F)
▪ Nominal diameter 50 mm (2in)
▪ Maximum pipe length 1.0 m (39in)
a) Install wastewater line up to connection to the sewer system
b) Secure the wastewater line with clamps.
c) Pour tap water into the wastewater trap on the unit.
Sewer system connection
d Wastewater system trap
e Pipe clamp
f Vacuum breaker valve
.
Advertisement
Table of Contents
