Table of Contents
Advertisement
Be sure to comply with the safety instructions and warnings in this chapter. Be sure to read
these instructions, even if you are already familiar with the operation and use of other
Leica products.
2.1
Safety instructions
This instruction manual contains important in-
structions and information regarding the oper-
ational safety and maintenance of the instru-
ment.
The instruction manual is an important part of
the product, which must be read carefully pri-
or to setup and use and must always be kept
near the instrument.
If additional requirements on acci-
dent prevention and environmental
protection exist in the country of op-
eration, this instruction manual must
be supplemented by appropriate in-
structions
with such requirements.
2.2
Dangers, warnings and cautions
The safety devices installed in this instrument by the manufacturer only constitute the ba-
sis for accident prevention. Primarily responsible for accident-free operation is above all
the institution which owns the instrument and, in addition, the designated personnel who
operates, services or repairs the instrument. To ensure trouble-free operation of the in-
strument, be sure to comply with the following instructions and warnings.
The protective devices on both instrument and accessories must neither be removed nor
modified.
Only authorized and qualified service personnel may repair the instrument and access the
instrument's internal components.
Leica CM1510 S – Cryostat
to
ensure
compliance
This instrument was built and tested in accor-
dance with the safety regulations for electrical
measuring, control, regulating and laboratory
devices.
For current information about applicable stan-
dards, please refer to the CE declaration of
conformity on our Internet site:
www.leica-microsystems.com
In order to maintain this condition and ensure
safe operation, the operator must observe all
the instructions and warnings contained in
this instruction manual.
2.
Safety
7
Hide quick links:
Advertisement
Table of Contents
