Sony MAVE-F555 Operation Manual page 127

Overwriting a cut
The operation for overwriting a cut depends slightly on whether the section
used for overwriting is specified on the player, or whether a section on the
recorder is specified as the source for overwriting (in other words, an operation
within a single file).
Overwriting a specified section on the recorder with a cut from the
player
R
4
STORE
1
V
TRIM
3,5
1
Press the [ ] key, to select OVERWRITE mode.
In the following steps 2 to 5, all of the player and recorder port IN and OUT
points are set, but either of the player and recorder OUT points may be left
unset.
2
Select the player port.
• To select another file, follow the procedure in the section "Selecting a
file" (page 3-1).
3
Press the MARK IN key and MARK OUT key on the MAVE-F555 to set
the IN point and OUT point respectively.
Chapter 3 Operations for Linear/Nonlinear Editing
PORT/FILE ASSIGN
P1 P2 BG
-
REDO
UNDO
A1 A2 A3
MARK IN MARK OUT
EXECUTE/
SHIFT
REC PREVIEW
7
2
+
6
A4
MARK
SPLIT
REPLAY
3-25 (E)