Sony MAVE-F555 Operation Manual page 120

3-2 Operations for Nonlinear Editing (Operations in Cut Units)
3-18 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
NOTE
• After executing the cut insertion, as the recorder file is replaced by the
editing result file, the monitor screen goes temporarily blank.
• When you select only specific channels to insert the cut in step 10 above,
then as shown in the following figure, the lengths of all channels are made to
match by appropriate insertion of BLACK/MUTING material.
Player
Recorder
Result of editing
when A1 and A2 are specified
V
A1
A2
A3
A4
For details of the holding period for the player and recorder IN point and OUT point,
see Section 3-2-6, "IN Point and OUT Point Holding Periods" (page 3-33).
Specified section
IN OUT
IN point
BLACK
MUTING
MUTING