Sony MAVE-F555 Operation Manual page 122

3-2 Operations for Nonlinear Editing (Operations in Cut Units)
Replacing a cut
3-20 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
The operation for replacing a cut depends slightly on whether the section for
replacement as the cut is specified on the player, or whether a section on the
recorder is specified for replacement as the cut (in other words, an operation
within a single file).
Replacing a section on the recorder with a cut specified on the
player
R
7
STORE
1
V
TRIM
4,9
6,11
1
Press the [ ] key, to select INSERT mode.
2
Select the player port.
• To select another file, follow the procedure in the section "Selecting a
file" (page 3-1).
3
Using the jog dial of the BVE-series editor, for example, search for the
start position (IN point) of the source of the replacement cut.
4
Press the MARK IN key on the MAVE-F555.
• The time data of the IN point appears on the monitor screen connected to
the MONITOR OUT connector of the MAV-555.
PORT/FILE ASSIGN
P1 P2 BG
-
REDO
UNDO
A1 A2 A3
MARK IN MARK OUT
EXECUTE/
SHIFT
REC PREVIEW
11
2
+
12
A4
MARK
SPLIT
REPLAY