Sony MAVE-F555 Operation Manual page 100

2-1 Example System Configurations and Device Connections
Connection with the TO MAV (PARALLEL I/O) connector
Edit #1
BVE-600
MAVE-F555
IN1(EDITOR R)
OUT1(MAV P1)
TO MAV
BVM-series or
other video
monitor
2-4 (E)
Chapter 2 Preparations
When using multiple MAVE-F555 units connected to a single MAV-555,
connect the TO MAV (PARALLEL I/O) connector of the MAVE-F555 to the
REMOTE PARALLEL I/O connector of the MAV-555. Connections of other
devices to the MAV-555 are the same as in the other MAV-555 operation
modes.
Edit #2
BVE-600
IN2(EDITOR P) POWER
OUT2(VTR) TO MAV(PARALLEL I/O)
AV SEL OUT D555 I/F
DC IN(12V)
1 2
SERIAL V/A IN R1
(COMPOSITE VIDEO IN R1)
NOTE
With the above connections, the operations possible from the MAVE-F555 are
restricted to file assignment on the port being controlled, and playback start/
stop (when the port being controlled is a playback port) or recording start/stop
(when the port being controlled is a recording port).
For more details, see Chapter 4, "Operations When Multiple MAVE-F555 Units Are
Connected to the MAV-555" (page 4-1).
MAVE-F555
IN1(EDITOR R) IN2(EDITOR P) POWER
OUT1(MAV P1) OUT2(VTR) TO MAV(PARALLEL I/O)
AV SEL OUT D555 I/F
DC IN(12V)
TO MAV
1 2
BVM-series or
other video
monitor
MAV-555
Edit #3
BVE-600
MAVE-F555
IN1(EDITOR R) IN2(EDITOR P) POWER
OUT1(MAV P1) OUT2(VTR) TO MAV(PARALLEL I/O)
AV SEL OUT D555 I/F
DC IN(12V)
TO MAV
1 2
BVM-series or
other video
monitor