Sony MAVE-F555 Operation Manual page 104

3-1 Operations for Linear Editing (Operations in File Units)
Superimposed port/file indications
3-2 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
2
Use the -/+ keys to select a file.
Each time you press a key, the file changes in the sequence of the MAV-
555 internal file numbers.
P 2 P 2
NOTE
• The file selection can only be carried out for an MAV-555 port. The
above operation is invalid for a port to which a VTR is connected.
• It is not possible to open the same file on different playback ports. A file
which is currently opened on another playback port is skipped, and
cannot be selected.
• It is not possible to open a file on the MAV-555 R2 port on the port to
which the R key is assigned.
If you want to open the same file on different playback ports, use the file copy
function. For details see Section 3-1-2, "Creating a New File" (page 3-5).
• If you press the + and - keys as explained in 2 above, the file number and
file name displayed on the monitor screen change, but actual file loading
does not start until a certain amount of time after you have stopped
pressing the keys. You can use the MAV-555 to set the amount of time
until the file actually starts loading after you have finished key
operations.
For details on these settings, see 2-2-4 Settings for Changing File Times (page 2-
5).
As when carrying out a file selection operation, if you change the operation
port or carry out file assignment, a superimposed port/file indication appears
on the monitor screen connected to the MAV-555 MONITOR OUT.
2 Port information 1 File number
P 1 R P
N
1 File number and file name
The file number and file name of the file assigned to the current port appear.
File number
0 0 0 4
M i a m i
0 0 1 4
E W J E R S E Y *
1 File name
V 1 2 3 4
* H u o s t o n
File name
3 Editing mode
V 1 2 3 4
P O R T L A N D