Table of Contents
Advertisement
5
As for the IN point, using the jog dial of the BVE-series editor, for
example, search for the OUT point.
6
Press the MARK OUT key on the MAVE-F555.
• The time data of the OUT point appears on the monitor screen.
While player port is selected
P
0
0 :
0
0 0 1
0
0 :
File number
7
Select the recorder port.
8
Using the jog dial of the BVE-series editor, for example, search for the IN
point of the section where you will insert the cut.
9
Press the MARK IN key.
• The time data of the IN point appears on the monitor screen.
While player port is selected
R
0 0 : 0 0 : 2 5 : 0 0
0 0 0 7
–
–
File number
10
Using the channel specification keys (V, A1, A2, A3, and A4), select the
channel(s) where you will insert the cut.
• Press the key(s) corresponding to the channel(s) in which you want to
insert the cut, turning on the indicator(s) above the key(s).
• If you select only specific channels to insert the cut, see next page, under
"NOTE."
11
To execute the cut insertion, press the EXECUTE/REC key.
• This inserts the cut, and "EDITED" appears on the monitor screen.
• The recorder file is replaced by the editing result file (the file after
inserting the cut), and the unit cues up to the OUT point of the inserted
section.
Chapter 3 Operations for Linear/Nonlinear Editing
IN point
0
0
: 1 5
:
0
8
0
0
: 3 5
:
0
8
OUT point
IN point
: –
–
: –
–
: –
–
V 1 2 3 4
O
U T
E
N
T
V 1 2 3 4
I N
E N
T
3-17 (E)
Advertisement
Chapters
Table of Contents
