Sony MAVE-F555 Operation Manual page 106

3-1 Operations for Linear Editing (Operations in File Units)
Registering Frequently Used Files
3-4 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
You can register frequently used files on the MAV-555 to the four MEMORY
keys on the MAVE-F555. After registration, by simply pressing a MEMORY
key you can assign the file to the port currently being controlled.
FILE
DEL NEW
FILE FILE
CUT
R
STORE
To register a file to a MEMORY key, use the following procedure.
1
Using the procedure in the section "Selecting a file" (page 3-1), select the
file you want to register.
2
Hold down the STORE key, and press one of the MEMORY keys (1 to 4).
This registers the file selected in step 1 to the MEMORY key.
• The indicator for the memory key to which you have registered the file
lights.
To recall a registered file
Press the MEMORY key to which you have registered the file you want to
recall.
This closes the file assigned to the port currently being controlled, and recalls
the file registered to the MEMORY key.
NOTE
• The registration information of files to MEMORY keys is discarded when the
MAV-555's power is turned off.
• The registration of files to MEMORY keys is not separately by port.
Irrespective of the selected port when you made the registration, the same file
is registered to a single MEMORY key.
• It is not possible to open the same file simultaneously on different playback
ports. Therefore, if the file registered to a MEMORY key is already opened
on another playback port, the MEMORY key operation is invalid. An attempt
to open a file already opened on another port produces an error message "xx
Using" (where "xx" is the name of the port on which the file is open) on the
monitor screen.
MEMORY
1 2 3
EFFECT
DISS WIPE TITLE AUDIO
PORT/FILE ASSIGN
P1 P2 BG
- +
4
2