Sony MAVE-F555 Operation Manual page 121

Specifying a section on the recorder, and inserting at a specified
position on the recorder
To specify the section for a cut to insert at a specified position within the same
file on the recorder, use the following procedure.
R
2
STORE
1
V
TRIM
4
6
4,6
1
Press the [ ] key, to select INSERT mode.
2
Select the recorder port.
3
Using the jog dial of the BVE-series editor, for example, search for the IN
point.
4
Holding down the SHIFT key on the MAVE-F555, press the MARK IN
key.
• This specifies the IN point for the source for the cut to be inserted.
5
As for the IN point, using the jog dial of the BVE-series editor, for
example, search for the OUT point.
6
Holding down the SHIFT key on the MAVE-F555, press the MARK OUT
key.
• This specifies the OUT point for the source for the cut to be inserted.
7
Now continue from step 8 of the procedure under "Specifying a section on
the player, and inserting at a specified position on the recorder" (page 3-16).
Chapter 3 Operations for Linear/Nonlinear Editing
PORT/FILE ASSIGN
P1 P2 BG
-
REDO
UNDO
A1 A2 A3
MARK IN MARK OUT
EXECUTE/
SHIFT
REC PREVIEW
+
A4
MARK
SPLIT
REPLAY
3-19 (E)