Replacing The 8X 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ Prepare the removing of the PCIe SSD module.
▶ Depending on your configuration and OS:
page 48.
Removing the defective 2.5-inch PCIe SSD module
▶ Remove the PCIe SSD module, see
module" on page
▶ If applicable, remove the PCIe SSD from the installation frame, see
"Handling HDDs or SSDs without installation frame" on page
Installing the new 2.5-inch PCIe SSD module
▶ If applicable, install the PCIe SSD in the installation frame, see
HDDs or SSDs without installation frame" on page
▶ Install the PCIe SSD module, see
on page 148.
Concluding steps
▶ If applicable,
"Switching on the server" on page
▶ If applicable, rescan available devices from your OS.
▶ If applicable,
"Installing the front cover with lock" on page
7.5.8

Replacing the 8x 2.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
152
150.
"Installing a 2.5-inch PCIe SSD module"
Upgrade and Maintenance Manual
"Shutting down the server" on
"Removing a 2.5-inch PCIe SSD
120.
66.
Hardware: 10 minutes
45.
120.
"Handling
66.
48.
RX2530 M6