Expansion cards and backup units
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the corresponding riser module, see
page
69.
Removing the slot cover
Figure 139: Removing the slot cover - example riser module 1
▶ Remove the slot cover.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
220
48.
Upgrade and Maintenance Manual
75.
49.
52.
"Removing a riser module" on
48.
RX2530 M6