Main memory
Removing a memory module
Figure 186: Removing memory modules
▶ Eject the desired memory module by pressing out the securing clips at each
end of the memory slot (1).
▶ Remove the ejected memory module (2).
▶ If applicable, install a dummy module, see
module" on page
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
10.5
Replacing memory modules
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver (for cover 2)
274
276.
74.
57.
66.
Upgrade and Maintenance Manual
"Installing a memory dummy
62.
93.
Hardware: 5 minutes
66.
RX2530 M6