Power supply unit (PSU)
Installing the new hot-plug PSU
▶ Install the PSU, see
Concluding steps
▶
"Connecting the power cord" on page
▶ Only when replacing a PSU in a non-redundant configuration:
the server" on page
▶
"Performing a fan test" on page
Performing a fan test is not needed if the system power was off and
DC stand-by power was available (AC power cord connected, but no
system power on) when replacing the PSU.
116
"Installing a hot-plug PSU" on page
66.
103.
Upgrade and Maintenance Manual
62.
110.
"Switching on
RX2530 M6