Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 157

Installing the internal RAID riser module (option)
Figure 76: Installing the internal RAID riser module
▶ Place the Internal RAID riser module on the three bolts (1).
▶ Push the Internal RAID riser module to the front to engage the holes and the
bolts (2).
▶ Fasten the Internal RAID riser module with the knurled screw (see circle).
Concluding steps
▶ Insert all HDD/SSD modules, see
on page 141.
Make sure that you reinstall the HDD/SSD module in the bay it was
located before the HDD backplane replacement.
▶ Insert all dummy modules, see
page 144.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX2530 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Installing a 2.5-inch HDD/SSD module"
"Installing a 2.5-inch dummy module" on
57.
62.
66.
Upgrade and Maintenance Manual
66.
157