Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 275

CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
For more information on configurations of Optane PMem modules
and DDR4 DIMMs, see
▶
Only for Optane PMem modules:
Check if the Optane PMem firmware is released for your BIOS
version.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
▶
"Locating the defective component" on page
Removing the defective memory module
▶ Remove the memory module, see
page 274.
Installing the new memory module
▶ Install the memory module, see
RX2530 M6
"Basic information" on page
48.
73.
"Removing a memory module" on
"Installing a memory module" on page
Upgrade and Maintenance Manual
45.
75.
49.
52.
46.
Main memory
264.
48.
271.
275