Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 170

Hard disk drive (HDD) / solid state disk (SSD)
▶
"Connecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the HDD/SSD modules from the rear HDD/SSD cage, see
"Removing a 2.5-inch HDD/SSD module" on page
Removing the defective rear HDD/SSD backplane
Figure 90: Disconnecting the cables from the rear HDD/SSD cage
▶ Remove the power cable (1), the OOB cable (2) and the SATA cable (3)
from the HDD backplane and the system board.
170
62.
Upgrade and Maintenance Manual
52.
143.
RX2530 M6