Replacing A Hot-Plug Psu - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Power supply unit (PSU)
Installing the dummy cover
Figure 37: Installing the dummy cover
▶ Insert the dummy cover into the empty bay with the impressed arrow symbol
facing to the left (see circle).
▶ Push the dummy cover into its bay until it locks in place.
CAUTION
▶
Always install dummy covers into unused bays to comply with
applicable EMC regulations and satisfy cooling requirements.
Concluding steps
No steps needed.
6.5

Replacing a hot-plug PSU

Customer Replaceable
Unit (CRU)
Tools: Phillips PH1 / (+) No. 1 screw driver (for DC PSU -48 V)
The procedure of replacing an AC PSU or a DC PSU differs only in
disconnecting/connecting the power cord.
114 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2530 M6