Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 155

▶ Release the two screws (see circles).
▶ Pull the HDD backplane upward until the 10 hooks disengage.
▶ Take out the HDD backplane.
Installing the new 8x 2.5-inch HDD backplane
Figure 72: Hooks and guide pins
▶ Notice the hooks (see circles) and guide pins (A).
Figure 73: Installing the 8x 2.5-inch HDD backplane
▶ Position the HDD backplane on the 10 hooks.
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
behind the guide pins.
CAUTION
▶
Ensure that none of the cables are strained or damaged!
▶ Fasten the two screws (see circles).
RX2530 M6
Hard disk drive (HDD) / solid state disk (SSD)
A
Upgrade and Maintenance Manual
A A
155