Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual page 229

Expansion cards and backup units
Removing the expansion card
▶ If necessary, disconnect the cables from the expansion card.
Figure 149: Removing the expansion card - example riser module 1
▶ Pull out the expansion card from the riser card slot.
Installing the slot cover
Figure 150: Installing the slot cover - example riser module 1
▶ Insert the slot cover. Make sure that the lug on the slot cover clicks into
place in the corresponding bracket (see circle).
RX2530 M6 Upgrade and Maintenance Manual 229