Inch Hdd/Ssd And 3.5-Inch Installation Frame - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Figure 41: Installing the 2.5-inch HDD/SSD in the 2.5-inch installation frame (B)
▶ Fasten the 2.5-inch HDD/SSD with four screws.
Removing a 2.5-inch HDD/SSD from a 2.5-inch installation frame
▶ Please proceed in reversed order.
Concluding steps
No steps needed.
7.3.3

2.5-inch HDD/SSD and 3.5-inch installation frame

Installing or removing the installation frame is only necessary for Japan.
Customer Replaceable
Unit (CRU)
Tools: Phillips PH1 / (+) No. 1 screw driver
RX2530 M6
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
Hardware: 5 minutes
123