Hologic ThinPrep Imager Duo Operator's Manual page 64

CAUTION
Extended Network Configuration
Route all connectors
The Review Scopes may be located at a greater distance from the Image Proces-
carefully to avoid
sor by using an extended network interconnection between the Server hub and
pinching the cables.
the Review Scope hub.
To avoid tripping
Low-level, industry standard interconnection devices such as switches, bridges,
over or
repeaters, media converters, copper and fiber wiring may be used. Refer to fig-
disconnecting
cabling, do not ure 2.2. The distance that Review Scopes may be located away from the Image
place cabling near
Processor is determined by the requirements of the specific apparatus used to
foot traffic.
create the network. The throughput of the extended network must be capable of
10Mbps or greater.
Note:
Component Configuration
The components may be arranged on the bench top as desired, providing the
connection cables can reach easily. The Image Processor Controller may be
I
MAGER
High-level interconnecting devices (routers and gateways) and wireless
devices must not be used. The devices used for the extended network
must form an isolated network used exclusively for the Imaging System
network. No other company networks, sub-networks or devices may be
connected to the network.
Figure 2-2 Extended Network Interconnection Schematic (Example)
D S I
UO YSTEM NSTALLATION
Imager Duo Operator's Manual
2
2.3