Hologic ThinPrep Imager Duo Operator's Manual page 63

2
I
MAGER
Location And Configuration
CAUTION
Local Network Configuration
Route all connectors
The Image Processor Controller, the Imaging Station, the monitor, keyboard,
carefully to avoid
mouse, the printer and a multiport Ethernet switch must be located in the same
pinching the cables.
area, so that interconnection cables easily reach each component (within 1.8
To avoid tripping
meters [6 feet] of each other). Refer to Figure 2-1. Review Scopes connected to
over or
the Image Processor Controller may be located up to 100 meters (328 feet) away,
disconnecting
or extended another 100 meters using a second switch.
cabling, do not
place cabling near
foot traffic.
2.2 Imager Duo Operator's Manual
D S I
UO YSTEM NSTALLATION
Figure 2-1 Local Network Interconnection Schematic (Example)