Hologic ThinPrep Imager Duo Operator's Manual page 155

4
O S M
PERATION OF THE OFTWARE ENU
System
The System has options for configuring your lab settings, page setup for send-
ing reports to print, printers (for selecting a printer, if more than one is on the
network) and an interface with the Server, for shut down purposes.
System - Lab Settings
The Lab Settings display allows the operator to enter the Lab name (which will
appear on reports that use it), set the date and time and the preferred date/time
format, enter the Imager name, turn the audible alarm on or off and choose how
many lines of data a report will display.
Figure 4-71 Lab Settings Window
Lab name - to enter a name, click the cursor in the lab name field then type the
name of the lab. (If a name is already present or you wish to change it, back
space through the characters, or highlight and delete.) Alphanumeric characters
may be used, up to 49 characters. Click the Apply button to save this setting.
4.56 Imager Duo Operator's Manual