Hologic ThinPrep Imager Duo Operator's Manual page 78

3
O
PERATION OF THE
2. Holding a loaded slide cassette upright, slide it between two dividers, onto
Note:
3. Push the cassette forward to seat the base firmly against the divider stops.
Note:
Note:
3.12 Imager Duo Operator's Manual
I D
MAGER
the Imaging Station platform.
The base of the slide cassette has a tab on both sides that must fit into the
guide on the undersides of each divider. (Refer to Figure 3-12.)
Figure 3-12 Loading a Slide Cassette Into the Imaging Station
When it is fully inserted, the cassette engages an optical sensor that detects
it is present. An image of the slide cassette appears in the corresponding
location on the User Interface. (Refer to Figure 3-13.)
Do not slam the cassettes into position. This can cause the slides to pop
out and potentially break.
Visually check to confirm that slides are not overhanging the retaining
features.
UO