Hologic ThinPrep Imager Duo Operator's Manual page 189

6
T
ROUBLESHOOTING
Shutdown System Option
If the system encounters an error condition that it cannot recover from, the User
Assessment dialog box will display and only the Shutdown System button is
available. (Figure 6-4.) The system must be restarted.
Figure 6-4 User Assisted Shutdown
Click on the button and allow the system to shut down. The system will shut
down the application, and then exit Windows and shut down the IPC. Power
off the Imaging Station using the power switch on the rear of the unit.
Wait at least 15 seconds before turning the components on again. Allow the sys-
tem to warm up and enter idle mode.
6.8 Imager Duo Operator's Manual