4
O
PERATION OF THE
Enable
To create an administrative password for the security feature, click on the
Enable... button. The following dialog box will appear, explaining that security
is system wide and that a password will be required to access restricted data.
Click Yes to set the password, or No to cancel the process.
To set a password, type the characters into the top field. (They will be substi-
tuted with dots on the display as they are typed. Figure 4-80.) Confirm the pass-
word by entering it again in the second field. Click OK when finished, or click
Cancel to cancel the process and return to the Security window.
The password is stored in the database on the server.
Important:
4.62
Imager Duo Operator's Manual
S
OFTWARE
Figure 4-79 Security Yes/No Dialog Box
Enter password:
• 1-16 characters
• alphanumeric
• case sensitive
Re-enter password to confirm
OK to accept password
Cancel to terminate the process
Figure 4-80 Set Security Password
Close and re-open the Data Management window on the server and
all workstations to apply the data restriction.
M
ENU