Hologic ThinPrep Imager Duo Operator's Manual page 56

1
I
NTRODUCTION
Protective Conductor
Terminal
Power on
Power off
Fuse
In vitro diagnostic
medical device
Authorized Repre-
sentative in the Euro-
pean Community
Manufacturer
Date of manufacture
1.18 Imager Duo Operator's Manual
To identify any terminal which
is intended for connection to
an external conductor for pro-
tection against electric shock
in case of a fault, or the termi-
nal of a protective earth
(ground) electrode
Indicates that the control
places the equipment in a fully
powered state.
Indicates that using the control
will disconnect power to the
device.
To identify fuse boxes or their
location
Indicates a medical device
that is intended to used as an
in vitro diagnostic medical
device
Indicates the Authorized Rep-
resentative in the European
Community
Indicates the medical device
manufacturer, as defined in
the EU Directi
ves 90/385/EEC, 93/42/EEC
and 98/79/EC
Indicates the date when the
medical device was manufac-
tured
IEC 60417 Graphical symbols
for use on equipment, symbol
5019
IEC 60417-1 Graphical sym-
bols for use on equipment,
symbol 5007
IEC 60417-1 Graphical sym-
bols for use on equipment,
symbol 5008
IEC 60417 Graphical symbols
for use on equipment, symbol
5016
ISO 15223-1 Medical
devices—Symbols to be used
with medical device labeling
and information to be sup-
plied, Section 5.5.1
ISO 15223-1 Medical
devices—Symbols to be used
with medical device labeling
and information to be sup-
plied, Section 5.1.2
ISO 15223-1 Medical
devices—Symbols to be used
with medical device labeling
and information to be sup-
plied, Section 5.1.1
ISO 15223-1 Medical
devices—Symbols to be used
with medical device labeling
and information to be sup-
plied, Section 5.1.3