Can_Utility; Select Can And Device; Can Speed; Stop Transmit - Nexcom VTC 1911 User Manual

Appendix A: Software Demo Utility for I/O Ports of Function Control

4. CAN_Utility

4.1 Select CAN and Device

Click the drop-down list to choose the CAN of the corresponding system
and press the Open button to apply the setting.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

4.2 CAN Speed

Press the Set button to set up the CAN Speed.

4.3 Stop Transmit

This function is used to stop CAN message transmit.

4.4 Clear receive FIFO

This function is used to clear receive FIFO.
37
VTC 1911 User Manual