Get Can Error Code; Filter; Message; Auto Send Message - Nexcom VTC 1911 User Manual

Appendix A: Software Demo Utility for I/O Ports of Function Control

4.5 Get CAN error code

This function is used to get CAN bus error code.

4.6 Filter

Press the Set button in the Filter section to set up the Filter information.

4.7 Message

Click the drop-down list to set up Message then press the Send button to
send those CAN information.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

4.8 Auto Send Message

Set the time interval in the textbox and press the Auto Send button to send
Message automatically or you can press Stop Send to stop the operation.

4.9 Information

Displays all CAN utility information, and you can press the Clear button to
erase all the information.
38
VTC 1911 User Manual