Table of Contents
Advertisement
Port Configuration
Object
•
Port
• Enable
• Action
•
Tx Mode
Buttons
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
4.3.10.2 Loop Protection Status
This page displays the loop protection port status of the switch; screen in
Description
The switch port number of the port.
Controls whether loop protection is enabled on this switch port.
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Figure 4-3-10-2: Loop Protection Status Screenshot
234
User's Manual of IGS PoE series
Figure 4-3-10-2
appears.
Advertisement
Table of Contents
