Planet Networking & Communication IGS-10020HPT User Manual page 313

Industrial l2+ multi-port gigabit poe+ managed ethernet switch
Table of Contents

Advertisement

The page includes the following fields:
User Module Legend
The legend shows all user modules that may request Port Security services.
Object
• User Module Name
• Abbr
Port Status
The table has one row for each port on the selected switch in the switch and a number of columns, which are:
Object
• Clear
• Port
• Users
• Violation Mode
• State
Description
The full name of a module that may request Port Security services.
A one-letter abbreviation of the user module. This is used in the Users column in
the port status table.
Description
Click to remove all MAC addresses on all VLANs on this port. The button is only
clickable if number of secured MAC addresses is non-zero.
The port number for which the status applies. Click the port number to see the
status for this particular port.
Each of the user modules has a column that shows whether that module has
enabled Port Security or not. A '-' means that the corresponding user module is
not enabled, whereas a letter indicates that the user module abbreviated by that
letter has enabled port security.
Shows the configured Violation Mode of the port. It can take one of four values:
Disabled: Port Security is not administratively enabled on this port.
Protect: Port Security is administratively enabled in Protect mode.
Restrict: Port Security is administratively enabled in Restrict mode.
Shutdown: Port Security is administratively enabled in Shutdown mode.
Shows the current state of the port. It can take one of four values:
Disabled: No user modules are currently using the Port Security service.
Ready: The Port Security service is in use by at least one user module, and
is awaiting frames from unknown MAC addresses to arrive.
Limit Reached: The Port Security service is enabled by at least the Limit
Control user module, and that module has indicated that the limit is reached
and no more MAC addresses should be taken in.
Shutdown: The Port Security service is enabled by at least the Limit Control
user module, and that module has indicated that the limit is exceeded. No
MAC addresses can be learned on the port until it is administratively
313
User's Manual of IGS PoE series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-10020ptIgs-20160hpt

Table of Contents