Planet Networking & Communication IGS-10020HPT User Manual page 50

User's Manual of IGS PoE series
You can change these settings, if desired, after you log on. This management method is often preferred because you can
remain connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port,
regardless of the interface through which the associated action was initiated. A Macintosh or PC attachment can use any
terminal-emulation program for connecting to the terminal serial port. A workstation attachment under UNIX can use an emulator
Remote Telnet
In Windows system, you may click "Start" and then choose "Accessories" and "Command Prompt". Please input "telnet
192.168.0.100" and press "enter' from your keyboard. You will see the following screen appears as Figure 3-2 shows.
Figure 3-2: Remote Telnet Interface Main Screen of Industrial Managed PoE+ Switch
50