Table of Contents
Advertisement
• Fast Leave
• Throtting
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.3.5.5 IGMP Snooping VLAN Configuration
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in
Figure 4-3-5-8
appears.
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier.
The Switch forwards IGMP join or leave packets to an IGMP router port.
Auto:
Select "Auto" to have the Industrial Managed PoE+ Switch
automatically uses the port as IGMP Router port if the port receives
IGMP query packets.
Fix:
The Industrial Managed PoE+ Switch always uses the specified
port as an IGMP Router port. Use this mode when you connect an
IGMP multicast server or IP camera which applied with multicast
protocol to the port.
None:
The Industrial Managed PoE+ Switch will not use the specified port
as an IGMP Router port. The Industrial Managed PoE+ Switch will
not keep any record of an IGMP router being connected to this port.
Use this mode when you connect other IGMP multicast servers
directly on the non-querier Industrial Managed PoE+ Switch and
don't want the multicast stream to be flooded by uplinking switch
through the port that is connected to the IGMP querier.
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
191
User's Manual of IGS PoE series
Advertisement
Table of Contents
