Static Aggregation - Planet Networking & Communication IGS-10020HPT User Manual

4.3.2.1 Static Aggregation

This page is used to configure the Aggregation hash mode and the aggregation group. The aggregation hash mode settings are
global.
Hash Code Contributors
The Static Aggregation screen in
The page includes the following fields:
Object
•
Source MAC Address
•
Destination MAC
Address
•
IP Address
•
TCP/UDP Port Number
Static Aggregation Group Configuration
The Aggregation Group Configuration screen in
Figure 4-3-2-2 appears.
Figure 4-3-2-2 : Aggregation Mode Configuration Page Screenshot
Description
The Source MAC address can be used to calculate the destination port for the
frame. Check to enable the use of the Source MAC address, or uncheck to
disable. By default, Source MAC Address is enabled.
The Destination MAC Address can be used to calculate the destination port for
the frame. Check to enable the use of the Destination MAC Address, or uncheck
to disable. By default, Destination MAC Address is disabled.
The IP address can be used to calculate the destination port for the frame. Check
to enable the use of the IP Address, or uncheck to disable. By default, IP Address
is enabled.
The TCP/UDP port number can be used to calculate the destination port for the
frame. Check to enable the use of the TCP/UDP Port Number, or uncheck to
disable. By default, TCP/UDP Port Number is enabled.
Figure 4-3-2-3
User's Manual of IGS PoE series
appears.
131