Planet Networking & Communication IGS-10020HPT User Manual page 124

power, temperature, laser bias current and transceiver supply voltage in real time. You can also use the
hyperlink of port no. to check the statistics on a specific interface. The SFP Module Information screen in
Figure 4-3-1-4
The page includes the following fields:
Object
• Type
• Speed
• Wave Length (nm)
• Distance (m)
• Temperature (C)
– SFP DDM Module Only
• Voltage(V)
– SFP DDM Module Only
• Current(mA)
– SFP DDM Module Only
• TX power (dBm)
– SFP DDM Module Only
• RX power (dBm)
appears.
Figure 4-3-1-4: SFP Module Information for Switch Page Screenshot
Description
Display the type of current SFP module; the possible types are:

10GBASE-SR

10GBASE-LR

1000BASE-SX

1000BASE-LX

100BASE-FX
Display the speed of current SFP module; the speed value or description is got
from the SFP module. Different vendors SFP modules might show different
speed information.
Display the wavelength of current SFP module; the wavelength value is got from
the SFP module. Use this column to check if the wavelength values of two nodes
are matched while the fiber connection failed.
Display the support distance of current SFP module; the distance value is got
from the SFP module.
Display the temperature of current SFP DDM module; the temperature value is
got from the SFP DDM module.
Display the voltage of current SFP DDM module; the voltage value is got from the
SFP DDM module.
Display the Ampere of current SFP DDM module; the Ampere value is got from
the SFP DDM module.
Display the TX power of current SFP DDM module; the TX power value is got
from the SFP DDM module.
Display the RX power of current SFP DDM module; the RX power value is got
User's Manual of IGS PoE series
124