• Direction
• Residence Port
• Level
• Flow Instance
• Tagged VID
• This MAC
• Alarm
Buttons
: Click to add a new MEP entry
: Click to refresh the page immediately.
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.7.1.2 Detailed MEP Configuration
This page allows the user to inspect and configure the current MEP Instantly as the screen in
Ingress: This is a Ingress (down) MEP - monitoring ingress traffic on 'Residence
Port'.
Egress: This is a Egress (up) MEP - monitoring egress traffic on 'Residence
Port'.
The port where MEP is monitoring - see 'Direction'.
The MEG level of this MEP.
The MEP is related to this flow - See 'Domain'.
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this
VID.
Entering '0' means no TAG added.
The MAC of this MEP - can be used by other MEP when unicast is selected (Info
only).
There is an active alarm on the MEP.
359
User's Manual of IGS PoE series
Figure 4-7-1-2
appears.