Planet Networking & Communication IGS-10020HPT User Manual page 54

1. This utility shows all the necessary information from the devices, such as MAC Address, Device Name, firmware version
and Device IP Subnet address. A new password, IP Subnet address and description can be assigned to the devices.
2. After setup is completed, press the "Update Device", "Update Multi" or "Update All" button to take effect. The meanings
of the 3 buttons above are shown below:

Update Device: Use the current setting on one single device.

Update Multi: Use the current setting on choose multi-devices.

Update All: Use the current setting on whole devices in the list.
The same functions mentioned above also can be found in "Option" tools bar.
3. To click the "Control Packet Force Broadcast" function, it allows new setting value to be assigned to the Web Smart
Switch under a different IP subnet address.
4. Press the "Connect to Device" button and then the Web login screen appears in
5. Press the "Exit" button to shut down Planet Smart Discovery Utility.
User's Manual of IGS PoE series
Figure 3-7.
54