Planet Networking & Communication IGS-10020HPT User Manual page 31

IGS-20160HPT
■ System
LED Color
P1 Green
P2 Green
FAULT Green
Ring Green
R.O. Green
■ PoE 10/100/1000BASE-T Interfaces (Port-1 to Port-16)
LED Color
LNK/ACT Green
PoE Amber
Lights to indicate power 1 has power.
Lights to indicate power 2 has power.
Lights to indicate power or port failure
Lights to indicate that the ERPS Ring has been created successfully
Lights to indicate the switch has been enabled to Ring Owner
Lights: To indicate the link through that port is successfully established.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate the port is providing DC in-line power.
To indicate the connected device is not a PoE Powered Device (PD)
Off:
User's Manual of IGS PoE series
Function
Function
31