Planet Networking & Communication IGS-10020HPT User Manual page 348

The page includes the following fields:
Object
• PoE Mode
• Schedule
• Priority
• Power Allocation
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-6-1-3: Power over Ethernet Configuration Screenshot
Description
There are three modes for PoE mode.
Enable: enable PoE function..

Disable: disable PoE function.

Schedule: enable PoE function in schedule mode.

Indicates the schedule profile mode. Possible profiles are:

Profile1

Profile2

Profile3

Profile4
The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in case the total power consumption is over the total power
budget. In this case, the port with the lowest priority will be turned off, and power
for the port of higher priority will be offered.
It can limit the port PoE supply wattage. Per port maximum value must be less
than 36W watts; total ports values must be less than the Power Reservation
value. Once power overload is detected, the port will automatically shut down
and continue to be in detection mode until Pad's power consumption is lower
than the power limit value.
User's Manual of IGS PoE series
348