Planet Networking & Communication IGS-10020HPT User Manual page 307

Industrial l2+ multi-port gigabit poe+ managed ethernet switch
Table of Contents

Advertisement

Rx
Other
Requests
Rx
Auth.
Successes
Rx
Auth.
Failures
Tx
Responses
307
User's Manual of IGS PoE series
dot1xAuthBackendOther
RequestsToSupplicant
dot1xAuthBackendAuth
Successes
dot1xAuthBackendAuth
Fails
dot1xAuthBackendResp
onses
table).
802.1X-based:
Counts the number of times
that the switch sends an EAP
Request packet following the
first to the supplicant.
Indicates that the backend
server chose an EAP-method.
MAC-based:
Not applicable.
802.1X- and MAC-based:
Counts the number of times
that the switch receives a
success indication. Indicates
that the supplicant/client has
successfully authenticated to
the backend server.
802.1X- and MAC-based:
Counts the number of times
that the switch receives a
failure message. This
indicates that the
supplicant/client has not
authenticated to the backend
server.
802.1X-based:
Counts the number of times
that the switch attempts to
send a supplicant's first
response packet to the
backend server. Indicates the
switch attempted
communication with the
backend server. Possible
retransmissions are not
counted.
MAC-based:
Counts all the backend server
packets sent from the switch

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-10020ptIgs-20160hpt

Table of Contents